Contact Us

Contacts: Lucy Lai/ Mr.Guo
Phone: +86-18262284583/+86-15052757999
Tel: +0086-510-88316899

Home > Exhibition > Content
Electric Bicycle Use Maintenance
Aug 29, 2017

First pay attention to clean, after the water especially in winter (many cities in the winter after the heavy snow spray salt water to avoid icing) more timely cleaning, otherwise it is very easy to cause metal parts rust, paint film aging off. The second is to pay attention to the maximum adjustment height. After a new car ride for a period of time, according to the requirements of the specification, the whole vehicle should be checked and adjusted. Fastening and lubrication are essential. Check whether the fastener is loose, the transmission is flexible, pay attention to the chain oil lubrication to wipe the slick, the flywheel point of a little gas can. The tyre should be inflated properly, otherwise it will affect the comfort and service life of the ride. Brakes are the basic guarantee of safety, and should be checked at any time, so long as the problem is found to be adjusted or repaired immediately.

1, the use of electric bicycles should be adjusted before the saddle and handlebar height, to ensure the comfort of riding, reduce fatigue. The saddle and handlebar height should vary from person to person, and the height of the saddle is appropriate for the rider to be reliable with one foot (the whole vehicle should be kept upright), and the height of the handlebar is appropriate for the rider's small arms to be laid, the shoulders and the arms relaxed. However, the saddle and handlebar adjustments should first ensure that the riser and the insertion depth of the riser must be higher than the safety marking line.

2, the electric bicycle should be checked and adjusted before and after the use of brakes. The front brake is controlled by the right brake and the rear brake is controlled by the left brake. The adjustment of front and rear brakes to the left and right of the handle to reach half of the stroke can be reliable brake is suitable;

3, electric bicycle should check the tightness of the chain before the action. The chain is too tight to pedal, easy to quiver and rub against other parts. The vertical degree of the chain is more suitable for 1-2mm, generally it can be properly tightened without pedal riding. Chain adjustment, first loosen the rear wheel nut, through the uniform rotation of the left and right chain screws, adjust the chain tightness, tighten the back of the wheel nut can be.

4, electric bicycle should check the lubrication of the chain before use. Feel and observe the chain axis rotation is flexible, link rust is serious. If rust or rotation is not flexible, should add a proper amount of lubricating oil, serious should replace the chain.

5, the electric bicycle ride, should check the tire pressure, steering flexibility, front and rear wheel rotation flexibility, circuit, battery power, motor working conditions and lighting, speakers, fasteners, etc. to meet the use requirements.

Previous: Battery maintenance of electric bicycles

Next: Chinese standard for electric bicycles